Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Porcelain tile
Carpet
Shaw
Mohawk
COREtec
PergoFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateTrusted Hardwood Floor Refinishing for Paradise Homeowners
Solid oak floors that have gone dull, gray, or scratched from years of foot traffic don’t need to be torn out. In most Paradise homes, they need sanding, staining, and a fresh finish, and that work costs far less than a full replacement. Our technicians have up to 12 years of experience reading wood grain, testing finish thickness, and knowing when a floor has enough material left to refinish and when it doesn’t. A bedroom floor that creaks underfoot with dull, worn finish is exactly the kind of job we handle, and we do it without the dust cloud older sanding methods left behind. Call (844) 797-3061 and we’ll book a free in-home measure and estimate, then set your install day once you approve the written price.
What Our Hardwood Floor Refinishing Service Includes
Refinishing isn’t one step. It’s a sequence of sanding, staining, and finishing that each has to be done right before the next one starts. Here’s what each part of the job covers.
Hardwood Floor Sanding
Sanding removes the old finish and levels the surface so the new finish can bond evenly. You need it when a floor shows scratches that go below the finish, gray patches where the top coat has worn through, or uneven texture from past spot repairs. We use a drum sander for the field and an edger for the perimeter, then hand-scrape corners and tight spots so the whole floor reads the same when it’s finished.

Hardwood Floor Staining
Staining sets the color of the finished floor, whether you want to match a sample, refresh a faded tone, or move to a completely different shade. You’d consider it when the existing stain has worn unevenly or the color no longer fits the room. We apply stain by hand in controlled sections, checking the color under the room’s actual light before locking it in, because stain looks different on the floor than it does on a paper sample.

Hardwood Floor Restoration
Restoration covers floors with deeper problems: water-stained boards, dark urine spots from pets, dents, gaps, or a finish that’s peeling in patches. You need it when the damage is more than surface wear but the wood itself is still sound. We identify which boards can be sanded back to clean wood and which have to be replaced with matching material, then blend the repairs into the surrounding floor before finishing.

Hardwood Floor Buffing
Buffing scuffs the top layer of finish to even out light wear and prepare the surface for a fresh coat. It’s the right call when the floor is dull but the wood underneath hasn’t been exposed yet. We buff with a fine abrasive pad, vacuum the dust thoroughly, then apply a new topcoat so the floor regains shine without a full sanding.
Screen and Recoat Hardwood Floors
A screen and recoat is a light surface prep followed by a new coat of finish, done without cutting into the wood itself. You’d choose it when the finish is worn but the stain and color are still good, and you want to protect the floor before bare wood shows. We screen the surface, clean it completely, and apply the new coat so it bonds to the existing finish rather than sitting on top of dust.
Stair Refinishing
Stair treads, risers, and stringers take more abuse than any other part of a wood floor, and they need to be finished with the same care as the field. You need stair refinishing when treads are worn through in the center or the finish has chipped at the nosing. We hand-sand treads and risers because a drum sander can’t reach or safely handle stair geometry, then finish them to match the floor below.
Styles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
Brands We Service for Hardwood Floor Refinishing
We work with hardwood from Shaw and Armstrong, and we know how both lines behave under sanding and stain. Shaw’s engineered and solid hardwood lines respond differently to abrasives depending on the finish the factory applied, so we test a small area before committing to a full pass. Armstrong hardwood, particularly older installations, often has a thinner wear layer than it appears, and we check remaining thickness at the estimate visit before we promise a refinish is possible.
We also work alongside Daltile tile and Karndean luxury vinyl when a home has mixed flooring and only part of the floor is getting refinished. Matching transitions between a refinished hardwood room and an adjacent Karndean floor takes planning at the estimate stage, not on install day. Whether you have Shaw, Armstrong, or any other make, we can help, and the written estimate tells you exactly what’s included.
Signs You Need Hardwood Floor Refinishing Right Now
Wood floors give you warning before they fail. These are the signs worth acting on.
- Finish worn through to bare wood. When the topcoat is gone and you can see raw wood in high-traffic paths, moisture gets in fast. Refinishing now protects the wood before water damage forces board replacement.
- Gray or whitish patches. Gray areas usually mean the finish has worn off and the wood surface is oxidizing. A screen and recoat can catch it early, but once it’s widespread, a full sanding is the fix.
- Deep scratches and gouges. Surface scuffs are cosmetic, but scratches you can feel with a fingernail have cut into the wood. Sanding levels them out; ignoring them lets dirt collect and wear the floor faster.
- Peeling or flaking finish. Finish that lifts in patches lets moisture under the edges, and it spreads. This one gets worse on its own, so it’s worth an estimate sooner rather than later.
- Dullness that buffing won’t fix. If buffing and a fresh coat bring the shine back for a few months and then it fades again, the finish layer is too thin to keep protecting the floor. That’s the point to refinish.
Our Hardwood Floor Refinishing Process – Step by Step
- 1
Free in-home estimate and wood check. We measure the space, check the thickness of the wear layer, and look for cupping, gaps, and moisture issues. If the wood is too thin to sand, we tell you at this stage, not after we’ve started.
- 2
Furniture move and dust control. We seal off the work area and set up dust containment before any sanding starts. The schedule and the scope of furniture moving are both set in the written estimate.
- 3
Sanding and edging. We run the drum sander in overlapping passes, edge the perimeter, and hand-scrape corners. We vacuum between grits so the next pass cuts clean wood, not packed dust.
- 4
Stain and finish application. Stain goes down in controlled sections and gets checked under the room’s light before the topcoat. We apply the finish coats in a dust-controlled space and let each one set per the product instructions.
- 5
Final walkthrough. We walk the floor with you, check the color and sheen against what was agreed, and go over care instructions. Any touch-up needed gets scheduled before we call the job done.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Hardwood Floor Refinishing Cost in Paradise?
Hardwood floor refinishing in Paradise typically runs $1,800 – $5,000 for a 500 to 800 square foot project, materials and labor included. That’s the range for sanding, staining, and finishing a typical home’s main living area. Smaller jobs land near the low end; larger rooms, stairs, and heavier restoration work push toward the top. Refinishing starts from about $3 per square foot, though the exact figure depends on the product, the room, and the condition of the subfloor and wood.
| Service | Typical estimated range |
|---|---|
| Hardwood floor refinishing | $1,800 – $5,000 |
| Hardwood floor installation (for comparison) | $4,500 – $12,000 |
| Floor repair (per job) | $250 – $1,500 |
What moves the price: the square footage, how much board replacement is needed, whether stairs are included, the stain and finish you choose, and the condition of the wood when we start. To avoid overpaying, get the scope in writing before work begins and confirm whether furniture moving and disposal are inside the number. The free estimate covers the wood thickness check, the measurement, and a written price, and the written estimate sets the final price.
Hardwood Floor Refinishing Near Paradise – Our Service Area
We handle hardwood floor refinishing across Paradise and the surrounding valley. Homeowners in Winchester, Spring Valley, and Summerlin are close by, and we also take on jobs in Las Vegas, Henderson, and Enterprise. For carpet, we’re equally at home with Carpet Installation Paradise, and if you’re comparing local options for Paradise or checking our reach toward Winchester, our team can give you a straight answer on scheduling when you call. Spring Valley homeowners get the same free in-home estimate. Call (844) 797-3061 and we’ll book a visit at a time that works for you.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Hardwood Floor Refinishing in Paradise
Hardwood floor refinishing is the process of sanding off the old finish, staining or re-staining the wood, and applying a new protective coat. It restores the look and protection of a wood floor without replacing the boards. It’s the “restore, don’t replace” path, and it’s usually the better value when the wood itself is still sound. Call (844) 797-3061 for a free estimate.
The schedule depends on square footage, how many coats go down, and the finish product’s own drying requirements. A typical single-room job takes multiple days from sanding through final coat, and the written estimate sets the exact timeline for your home. We confirm the schedule at the estimate so you can plan around it. Call (844) 797-3061 to book your estimate.
A typical hardwood floor refinishing job in Paradise runs $1,800 – $5,000 for a 500 to 800 square foot project, materials and labor included. Stairs, extra board replacement, and premium stains move the number, and refinishing starts from about $3 per square foot. The free estimate gives you a written price, and that written estimate sets the final price. Call (844) 797-3061 for an exact quote.
Yes, we refinish Shaw and Armstrong hardwood, along with other makes. Both brands’ finishes respond differently to sanding, so we test a small area before a full pass. We also plan transitions when a refinished room meets a Daltile tile or Karndean floor. Call (844) 797-3061 and tell us what you have.
We offer same-day service where the schedule allows, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Refinishing is a scheduled job: a free in-home measure and estimate first, a written price, then a booked install day. We answer 24/7. Call (844) 797-3061.
Warranty terms depend on the finish product used and the scope of the job, so we put them in writing on your estimate rather than quoting a generic term. Product instructions set the cure and care requirements, and the written estimate sets the final price. Ask about coverage when you book. Call (844) 797-3061 for details.
Clear furniture and breakables from the work area and plan to stay off the floor while finish coats cure. The written estimate spells out what we move and what you handle, and product instructions set the cure time for your finish. We walk through the prep list with you at the estimate visit. Call (844) 797-3061 to schedule.
Schedule Your Hardwood Floor Refinishing Service in Paradise Today
Dull, scratched, or peeling wood floors don’t fix themselves, and the sooner they’re refinished, the less chance you’ll need board replacement. Call (844) 797-3061 to schedule your free, no-obligation in-home estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll measure, check the wood, and give you a written price before any work starts.
Written by the team at Carpet Installation Paradise.